Name: 09RAC-14 Car audio capacitor
MODEL:09RAC-14
SIZE: Dimensions :76*153mm  (HEIGHT:153--244mm)
Capacitance: 0.1—0.5F
Rated working volt: DC 18V
WORK TEMPERATURE:-40°C~115 °C
Dielectric Material:Aluminum Foil and Paper
Scope of application :automotive
Appearance: Square.
Power performance: small power
Leader Type:No lead  (screw terminal )
Capacitance tolerance ±10(%)

Specification:
Car audio power capacitorwith aluminum sleeve
Optional digit voltage display
Installation hardware included
Optional farad

Features
1.Car audio power capacitor
2.Extreme low equivalent series resistance
3.24volt surge with over-voltage protection circuit
4.Electronic polarity protection circuit
5.Mounting brackets and hardware included
6.Optional digit voltage display :red /blue (generally the cost of the blue digit
7.display is higher than the red one )
8.Capacitor tolerance : -10%
9.Options available :24k gold or hard nickel plated terminals ,colors of sleeve

Installation Instructions
1.In order to achieve the best effect,Car audio power capacitor installation location should be as far as possible close to the power amplifier,use shorter power connect line ,at the same time installation the car audio power capacitor in the place not easy to touch,To a certain extent, isolated the heat generated by the power amplifier
2.The power line should as short as possible ,The fuse do not install between the capacitance and power amplifier. But make sure the main supply battery cable using the appropriate fuse to protect the power supply circuit..
3. Car audio power capacitor anode line should be as short as possible, and directly connected to the car metal surface bare cable .
4. Capacitor of the power cord should be the same GA number as the power amplifier power cord.
5. Connect one end of the line of control to car audio automatic antenna connector.

ITEM

CAPACITY

SIZE

VOLTAGE:18V

0.1F

76*153MM

0.2F

76*153MM

0.3F

76*153MM

0.4F

76*153MM

0.5F

76*153MM

0.7F

76*217MM

0.8F

76*217MM

1F

76*217MM

1.5F

76*217MM

2F

89*230MM

2.5F

89*230MM

3F

89*244MM

3.5F

89*244MM

4F

100*244MM

4.5F

100*244MM

Can produce according to customer's requirement,OEM is acceptable.